Flame Scanner Amplifier | MBCE-UV +44 (0)1204 594941

Flame Scanner Amplifier | MBCE-UV


UV amplifier for flame scanners. Offers SPDT flame relay and 4-20mA output. Din Mountable


The MBCE-110/230UV modules provide visual indication and electrical outputs that signal the user regarding flame presence in a combustion chamber. The module uses Fireye UV scanners to sense flame presence independently or as components in a burner management system. Many operational characteristics are provided including:

  • CE certified
  • Self-contained: 110 VAC, 50/60 Hz:

      MBCE-110UV-1, MBCE-110UV-2 MBCE-110UV-3, MBCE-110UV-4

  • 230 VAC, 50/60 Hz:

      MBCE-230UV-1, MBCE-230UV-3

  • UV scanner compatible*
  • Flame ON/OFF LED indicator
  • 4-20mA output permits direct reading of flame signal strength
  • Uses CE certified 11-pin relay base
  • Panel surface or DIN-rail mounting
  • Flame pull-in threshold adjustment

The module provides a cost effective method of monitoring flames using UV sensing. The MBCE-UV is intended for non-permanent operation (burner must be recycled at least once every 24 hours). The MBCE-UV is ideally suited for flame detection in natural gas applications; however, it can be used for flame detection in propane and light fuel oil applications.


• 110 or 230v opperation
• For use with flame rods (Ionisation rod)
• Solid state self check for continuous use
• 1 x SPDT Flame on relays
• 1 x SPST Fault relay
• 1 x 4-20mA flame quality output.
• Test jacks
• DIN rail mountable
• Self checking LED
• Flame on LED
• Plug in base
• Approved for SIL2 Installations
• Can be supplied in Zone 1 / 21 enclosures up to 4 per box
• Atex zone 1 cable available
• Ionisation and ignition electrodes available in safe or Atex enclosures